This is a pre-production variation of Clotho ABS, it differs from the serial one by the requirement of a higher print temperature and a reduced print speed.
Rigid and durable composite based on ABS, reinforced with chopped fiberglass. The mass fraction of fiberglass is 12%.
When printing, it is desirable to use carbide dies/nozzles.
The material has practically no shrinkage, so they can easily print dimensional objects. In terms of strength, the material is significantly superior to pure ABS, both at breaking loads along the layers and in terms of interlayer adhesion.
Operating temperature from -50 to +103°C
It is delivered WITHOUT a box, in a vacuum bag with silica gel.