RUBBER plastic REC 2.85 mm black
О товаре
REC RUBBER-rubber for 3D printing. A special material that is very close to real rubber in its properties, repeating all its properties. The material is very well suited for printing: buttons, seals, shock absorbers and even tires for radio-controlled models!
It is glued together with the help of synthetic rubbers or with the help of a soldering hair dryer. Each coil is packed in a reusable vacuum bag with silica gel, so that the plastic does not lose its properties during storage.
It is glued together with the help of synthetic rubbers or with the help of a soldering hair dryer. Each coil is packed in a reusable vacuum bag with silica gel, so that the plastic does not lose its properties during storage.
| Print Settings | |
| Nozzle temperature | 225-245°C |
| Table temperature | 90-110°C |
| Blowing | not recommended |
| Recommended adhesive | The3D Glue, Blue Scotch tape |
| Min. nozzle diameter | 0.4 mm |
| Safety | ||
| The defined component | Volume of secretions, mg/mC | MPC, mg/mC |
| Methanol | <0,1 | 15 |
| Acetaldehyde | <0,5 | 5 |
| Formaldehyde | <0,25 | 0,5 |
| Styrene | <0,05 | 30 |
Comparison of materials in a simple way and for professionals
For more information about the characteristics, advantages and parameters of Rubber-plastic printing, you can read in article
Features
- Material SEBS
- Thread diameter 2.85 мм
- Colour Черный (RAL 9011)
- Net weight 750 g
- Length 114 m
- EAN 4627095770616
- Made in Россия
Categories: Rubber (SEBS)
RUBBER plastic REC 2.85 mm black reviews (0)
Write a review| 0 | ||
| 0 | ||
| 0 | ||
| 0 | ||
| 0 |
Be the first to write a review of this product!
