Flashforge Adventurer 3 3D Printer

Flashforge Adventurer 3 - A 3D printer with a closed camera that combines a concise design, compact size and modern technologies for the most efficient printing.

Features and advantages of the printer:

The printer has a built-in plastic cartridge with a filament end sensor, which will help protect the printer from printing idle and the result will not be lost.

Thanks to the locking buttons with which the nozzle is removed, it will not be difficult to change it or clean it and will not take much time. The nozzle is made of stainless steel, which allows it to heat up in the shortest possible time.

The compact Adventurer 3 extruder is equipped with a soft backlight for a better overview of the printing process. The heating temperature range of the extruder is from 20 to 220 °C.

On the printer case there is a 2.8-inch touch screen with a simple and intuitive interface.

The noise level of the 3D printer is less than 45 dB – super quiet printing.

At a noise level of 50 dB at night, angiopathy can be triggered, children are negatively affected by a noise level of 55 dB. The noise produced by Flashforge Adventurer 3 is about 42 dB, which allows you to comfortably be near the printer while printing.