Anycubic 4Max Pro 3D Printer

4Max Pro Anycubic is a new version of the FDM printer in a closed case with a large construction area and a titanium extruder. It has a completely new modern ergonomic design, the printer is delivered fully assembled, only a simple calibration of the platform is required. 4Max Pro is perfect for both educational institutions and professionals.

What's new:

• The fully enclosed camera ensures safety even for the most careless users. In addition, it also serves as a thermal jacket, maintaining a constant temperature, due to which ABS printing is much better.
• The titanium extruder ensures a smooth flow of plastic and, importantly, compatibility with TPU filaments.
• The rigidly fixed and heated Ultrabase platform developed by Anycubic is designed to provide high adhesion of the first layers.
• Significantly increased print area of 270 mm *205 mm *205 mm compared to the previous Anycubic 4Max model.
• A convenient touch screen located on the top panel at a slight angle. The screen is multilingual with an intuitive, simple interface.
• 4Max Pro turns off automatically when printing is finished, saving energy.
• The printer is equipped with a power failure sensor and a thread end sensor. Printing will resume from the stop point after the power supply is applied. If the thread runs out or is interrupted, the printer will suspend operation until the problem is resolved.
• In addition, the 4Max Pro is very quiet in operation and will not interfere with sleeping or working.