Working hours:
Обработка заказов с 09:00 до 18:00 по будням
PLA plastic REC 1.75 mm brown 2kg
SKU code: RR1S3112
SKU code: RR1S3112
Large brown REC PLA 1.75-opaque dark chocolate color
In stock
Features
- Material
- PLA
- Thread diameter
- 1.75 мм
- Colour
- Коричневый (RAL 8016)
- Net weight
- 2 kg
- Length
- 665 m
- SanEpidem
- соответствует
- Допуск к пище
- соответствует
- EAN
- 4627095771187
Features
- Material
- PLA
- Thread diameter
- 1.75 мм
- Colour
- Коричневый (RAL 8016)
- Net weight
- 2 kg
- Length
- 665 m
- SanEpidem
- соответствует
- Допуск к пище
- соответствует
- EAN
- 4627095771187
Order by phone8 (800) 775-73-31
Free shipping if you buy up 5000rub
We can go to the state procurement service
We work under 223-FZ and 44-FZ, if you are planning a purchase, feel free to contact us
Fast delivery
We ship orders every weekday at 13: 00. If you need it urgently , we will bring it to Moscow in 3 hours.
Warranty and Quality
Within 14 days, you can return or exchange just like that. We change the marriage during the entire warranty period.
Convenient payment
Pay for the purchase online, by invoice, or upon receipt. We work with phys. and legal entities, with and without VAT.
- PLA is the most popular material for 3D printing. It is made from corn and sugar cane, which is why it is so eco-friendly and absolutely safe. For home and office 3D printing, REC PLA is most often used-it is completely harmless and it is very easy to print with it, because it does not require special temperature conditions and, most importantly, models made of PLA do not bend and do not crack when the ambient temperature changes due to the absence of the effect of heat shrinkage.
It is ideal for printing any decorative and functional models. Mechanical processing and painting are allowed. Natural REC PLA plastic has no dyes in its composition, therefore it is the most transparent in our line of plastics, after a certain processing it can be made even more transparent.
It is soluble in dichloromethane. It is recommended to use epoxy resin for gluing models.
Each coil is packed in a reusable vacuum bag with silica gel, so that the plastic does not lose its properties during storage.
Print Settings Nozzle temperature 200-220°C Table temperature 0-60°C Blowing highly desirable Recommended adhesive The3D Glue, Blue Scotch tape Min. nozzle diameter 0.1 mm Safety The defined component Volume of secretions, mg/mC MPC, mg/mC Methanol <0,1 15 Acetic acid <2,5 5 Acetone 1,285 +/- 0,320 800 Comparison of materials in a simple way and for professionals
For more information about the characteristics, advantages and parameters of PLA-plastic printing, you can read in article
Loading data...
Close window
(Window will close in sec)
Quantity: 1
Поделится ссылкой